This is historical information of device classes implemented in PiLCTriggerGenerator device server.

Use this link to find the valid information.

Development status: Released
Information status: New

Contact:


Class Description

Trigger generator using the PiLC

Families: OtherInstruments

Key words:

Platform: Unix Like

Language: Cpp

License: GPL

Contact:

Hardware

Manufacturer: none

Bus: Not Applicable

Class interface

Attributes:

Name Description
PositionTriggerStartScalar: DevDouble Position at which the triggers start after arming (used if triggermode 1, 3 or 6)
PositionTriggerStepSizeScalar: DevDouble Step size for triggers in position (used if triggermode 1, 4 or 6).
NbTriggersScalar: DevLong Number of trigger to generate
TriggerPulseLengthScalar: DevDouble Length of the trigger pulse. Used in all trigger modes. It has to be smaller than the TimeTriggerStepSize (for trigger modes 2 and 3) and smaller than the time the motor needs for travelling the PositionTriggerStepSize for trigger modes (1 and 4).
ArmScalar: DevLong Set to 1 for start triggering und to 0 to stop.
TriggerModeScalar: DevLong Trigger Mode: start and step in: 1 -> position, 2 -> time, 3 -> position-time , 4 -> time-position, 5 -> external signal, 6-> zig-zag mode, triggers generated in postions between two limits.
TimeTriggerStartScalar: DevDouble Time delay before start triggering after arming (only used if triggermode 2 or 4)
TimeTriggerStepSizeScalar: DevDouble Step size for triggers in time (only used if triggermode 2 or 3).
Position1ConversionScalar: DevDouble Conversion from enconder values to physical units: steps = conversion*units
CurrentPosition1Scalar: DevDouble Encoder position transformed to physical units
FilePrefixScalar: DevString File to save the data: FilePrefix.csv
FileDirScalar: DevString Directory to save the data
TriggerCounterScalar: DevLong —
EncoderTriggerScalar: DevLong Encoder position where the current trigger is done.
RemainingTriggersScalar: DevDouble —
BufferLoadScalar: DevDouble Percentage of SDRAM buffer currently read
Position2ConversionScalar: DevDouble Conversion from enconder values to physical units: steps = conversion*units
Position3ConversionScalar: DevDouble Conversion from enconder values to physical units: steps = conversion*units
Position4ConversionScalar: DevDouble Conversion from enconder values to physical units: steps = conversion*units
Position5ConversionScalar: DevDouble Conversion from enconder values to physical units: steps = conversion*units
PositionTriggerStopScalar: DevDouble Position at which the triggers stop (only used if triggermode 6)
EncoderTriggeringScalar: DevLong Encoder used for trigger settings in position
CurrentPosition2Scalar: DevDouble Encoder position transformed to physical units
CurrentPosition3Scalar: DevDouble Encoder position transformed to physical units
CurrentPosition4Scalar: DevDouble Encoder position transformed to physical units
CurrentPosition5Scalar: DevDouble Encoder position transformed to physical units
CounterDataSpectrum: DevDouble —
Encoder1DataSpectrum: DevDouble Positions where the triggers were done, in encoder units
Position1DataSpectrum: DevDouble Positions where the triggers were done, in physical units.
Encoder2DataSpectrum: DevDouble Positions where the triggers were done, in encoder units
Encoder3DataSpectrum: DevDouble Positions where the triggers were done, in encoder units
Encoder4DataSpectrum: DevDouble Positions where the triggers were done, in encoder units
Encoder5DataSpectrum: DevDouble Positions where the triggers were done, in encoder units
Position2DataSpectrum: DevDouble Positions from encoder2, in physical units.
Position3DataSpectrum: DevDouble Positions from encoder2, in physical units.
Position4DataSpectrum: DevDouble Positions from encoder2, in physical units.
Position5DataSpectrum: DevDouble Positions from encoder2, in physical units.

Commands:

Name Description
StateInput: DevVoid
Output: State
Device state		 This command gets the device state (stored in its device_state data member) and returns it to the caller.
StatusInput: DevVoid
Output: ConstDevString
Device status		 This command gets the device status (stored in its device_status data member) and returns it to the caller.
CalibrateEncoder1Input: DevDouble
Position to load (in physical units)
Output: DevVoid		 Set encoder position to the given value (in physical units).
CalibrateEncoder2Input: DevDouble
Position to load (in physical units)
Output: DevVoid		 Set encoder position to the given value (in physical units).
CalibrateEncoder3Input: DevDouble
Position to load (in physical units)
Output: DevVoid		 Set encoder position to the given value (in physical units).
CalibrateEncoder4Input: DevDouble
Position to load (in physical units)
Output: DevVoid		 Set encoder position to the given value (in physical units).
CalibrateEncoder5Input: DevDouble
Position to load (in physical units)
Output: DevVoid		 Set encoder position to the given value (in physical units).

Pipes:

Name Description

Properties:

Name Description
PiLCDeviceDevString Name of the PiLC tango device to connect to

12 Mar 2022, DS Admin
Updated:
The device class has been updated.
You can see previous version here .


13 Jun 2020, DS Admin
Updated:
The device class has been updated.
You can see previous version here .


10 Aug 2019, DS Admin
Updated:
The device class has been updated.
You can see previous version here .


3 Aug 2019, DS Admin
Updated:
The device class has been updated.
You can see previous version here .


6 Apr 2019, DS Admin
Updated:
The device class has been updated.
You can see previous version here .


27 Oct 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .


20 Oct 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .


6 Oct 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .


29 Sep 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .


28 Apr 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .


24 Mar 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .


3 Feb 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .


19 Aug 2017, Piotr Goryl
Updated:
The device class has been updated.
You can see previous version here .


6 May 2017, Piotr Goryl
Updated:
The device class has been updated.
You can see previous version here .


23 Feb 2017, Piotr Goryl
Updated:
The device class has been updated.
You can see previous version here .


19 Jan 2017, Piotr Goryl
Updated:
The device server has been updated.
You are looking at this version now.


2 Jan 2017, Piotr Goryl
Created:
The device server has been added to catalogue.
Added by:pgoryl2 on:19 Jan 2017, 10:50 a.m.