This is historical information of device classes implemented in FPS3010LCtrl device server.
Use this link to find the valid information.
Development status:
Released
Information status: New
Contact:
Class Description
Tango device server for Attocube FPS3010 interferometer
Families: MeasureInstruments
Key words:
Platform: Unix Like
Language: Cpp
License: GPL
Contact:
Hardware
Manufacturer: Attocube
Product:
Bus: Not Applicable
Class interface
Attributes:
| Name | Description |
|---|---|
| DeviceFeaturesScalar: DevLong | Bitfield: 0x01: Ethernet enabled 0x02: Angular measurement 0x04: Digital inputs 0x08: Environmental compensation |
| CollectDataUpdateTimeScalar: DevULong | Logarithmic time distance of two subsequent position measurements. The actual sample time can be varied only in powers of two: sample time = 10.24us * (2 ^ lbSmpTime). Allowed range is 0 ... 24 (10.24us ... 172s) . The sample time directly affects the data rate! |
| CollectDataMaxSizeScalar: DevULong | The maximum number of position data elements the CollectDataStart / CollectDataTime are allowed to collect. Once this value is exceeded data collection will be stopped. This is just a precaution tp prevent the program from eating up all the memory if someone forgets to call CollectDataStop or runs CollectDataTime with a too high setting. |
| FileDirScalar: DevString | — |
| FilePrefixScalar: DevString | — |
| FileStartNumScalar: DevLong | — |
| FilePostfixScalar: DevString | — |
| FileSavingScalar: DevBoolean | — |
| TemperatureScalar: DevDouble | — |
| AirPressureScalar: DevDouble | — |
| HumidityScalar: DevDouble | — |
| RefractionScalar: DevDouble | — |
| PositionsSpectrum: DevDouble | — |
Commands:
| Name | Description |
|---|---|
| ResetAxisInput: DevULong axis number (0-2) Output: DevVoid |
— |
| SignalQualityInput: DevULong Axis number (0-2) Output: DevULong signal quality (the higher the better) |
— |
| StateInput: DevVoid Output: State Device state |
This command gets the device state (stored in its device_state data member) and returns it to the caller. |
| StatusInput: DevVoid Output: ConstDevString Device status |
This command gets the device status (stored in its device_status data member) and returns it to the caller. |
| AxisStatusInput: DevULong axis number Output: DevLong 0: axis is successfully aligned, signal quality is sufficient 1: axis is successfully aligned, signal quality is insufficient 2: axis is not successfully aligned, signal quality is sufficient 3: axis is not successfully aligned, signal quality is insufficient |
— |
| AdjustInput: DevVoid Output: DevVoid |
start the adjustment procedure |
| RecalibrateInput: DevVoid Output: DevVoid |
Start the recalibration procedure. |
| SetPollTimeInput: DevVarULongArray arg[0] : axis number arg[1] : poll time (= 80ns * (2 ^ arg[1]), range 0->31 Output: DevVoid |
— |
| GetPollTimeInput: DevULong axis number Output: DevULong poll time (= 80ns * (2 ^ arg[1]), range 0->31 |
get poll time for axis |
| CollectDataTimeInput: DevULong time to run position data collection in ms Output: DevVoid |
time to run position data collection in ms |
| GetMeanDevInput: DevULong Output: DevVarDoubleArray 0: average value 1: standard deviation |
Get results per axis after a CollectData call |
| RunCallBackInput: DevVarUShortArray 0:true: start callback function 0:false: stop callback function 1:true routine ran ok 1:false: routine hit datasize limit Output: DevVoid |
for internal use only, never call from client |
| CollectDataStartInput: DevVoid start position data collection Output: DevVoid |
— |
| CollectDataStopInput: DevVoid stop position data collection Output: DevVoid |
— |
| GetCollectDataInput: DevULong Axis number Output: DevVarDoubleArray |
— |
Pipes:
Properties:
| Name | Description |
|---|---|
| DeviceIDDevLong | ID of device, if no IpAdress is set or ConnectType is empty or set to `usb`, the ID is used to identify the device. |
| ConnectTypeDevString | Connection method, may be `net` for tcp/ip or `usb` for usb. If empty / not set, devices will be searched on both types. |
| HostNameDevString | IP Address or hostname If set, device will be identified by this name/address, otherwise identification will be done by DeviceID. |
| TriggerSourceDevString | Device/Attribute which emits trigger signal to start data collection |
| UseTriggerDevBoolean | whether to use trigger (true) or not (false) |
23 Feb 2017, Piotr Goryl
Updated:
The device class has been updated.
You can see previous version here .
19 Jan 2017, Piotr Goryl
Updated:
The device server has been updated.
You are looking at this version now.
2 Jan 2017, Piotr Goryl
Created:
The device server has been added to catalogue.
Updated:
The device class has been updated.
You can see previous version here .
19 Jan 2017, Piotr Goryl
Updated:
The device server has been updated.
You are looking at this version now.
2 Jan 2017, Piotr Goryl
Created:
The device server has been added to catalogue.
Added by:pgoryl2
on:19 Jan 2017, 10:42 a.m.