This is historical information of device classes implemented in LKS336HeaterOutput device server.
Use this link to find the valid information.
Development status:
Released,
Release: Release_1_2
Information status: Updated
Repository:
http://svn.code.sf.net/p/tango-ds/code/DeviceClasses/Temperature/LKS336HeaterOutput
Contact:
Class Description
Heater Output of the LKS336 Temperature Controller
Families: Instrumentation
Key words:
Platform: Unix Like
Language: Cpp
Contact:
Hardware
Manufacturer: Lake Shore Cryotronics
Product:
Model 336 Temperature Controller
Bus: GPIB
Class interface
Attributes:
| Name | Description |
|---|---|
| ResistanceScalar: DevLong | 1->25Ohms, 2->50Ohms |
| ControlModeScalar: DevLong | 0= Off 1= Close loop PID 2= Zone 3= Open loop 4= Monitor out 5= Warmup supply |
| ControlModeInfoScalar: DevString | — |
| ControlChannelScalar: DevLong | 0->none,1->A,2->B,3->C,4->D |
| ProportionalScalar: DevFloat | Proportional parameter (also called gain). |
| IntegralScalar: DevFloat | Integral parameter (also called reset). |
| DerivativeScalar: DevFloat | Derivative parameter (also called rate). |
| SetPointScalar: DevDouble | Temperature Setpoint |
| RampRateScalar: DevDouble | — |
| HeaterRangeScalar: DevLong | Heater Range: 0 to 3. 0 = Off 1 = Low 2 = Medium 3 = High |
| TemperatureScalar: DevDouble | Temperature from the ControlChannel. -9999 if not control channel connected. The units are read from hw. |
| HeaterOutputScalar: DevDouble | Heater output in percent. |
| RampOffOnScalar: DevLong | — |
Commands:
| Name | Description |
|---|---|
| StateInput: DevVoid Output: State Device state |
This command gets the device state (stored in its device_state data member) and returns it to the caller. |
| StatusInput: DevVoid Output: ConstDevString Device status |
This command gets the device status (stored in its device_status data member) and returns it to the caller. |
Pipes:
Properties:
| Name | Description |
|---|---|
| GpibDeviceNameDevString | Gpib device connecting to the hardware |
| OutputDevLong | Output number (1, 2, 3 or 4) |
| GpibIDDevLong | Gpib device address when using a prologix adapter |
Updated:
The device class has been updated.
You are looking at this version now.
27 Mar 2021, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
30 May 2020, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
23 Feb 2017, Piotr Goryl
Updated:
The device class has been updated.
You can see previous version here .
19 Jan 2017, Piotr Goryl
Updated:
The device server has been updated.
You can see previous version here .
2 Jan 2017, Piotr Goryl
Created:
The device server has been added to catalogue.