tango-w1therm

README

b"tango-w1therm\n=============\n\nA Tango device server for 1-wire digital temperature sensors using w1_therm driver. \nThis includes DS18*20, DS28EA00, GX20MH01 and their clones.\n\nThe server only supports reading the temperature, there is no support for setting any parameters, alarms, etc. (and I'm not sure there ever will be).\n\nRequirements\n------------\n\n Python 3.x (it should work on 2.7, but this was not tested)\n pytango 9.2+\n* w1_therm, obviously\n\nInstallation\n------------\n\nTo install, run sudo python setup.py install in the project's directory. \nTo run, use w1therm <instance_name>.\n\nConfiguration\n-------------\n\nThe device is configured using device_id property. It is the sensor ROM ID advertised over 1-wire bus. \nYou can find the IDs of all 1-wire devices by running ls /sys/bus/w1/devices. \nThe ID should look something like this: 28-3c01e076af23. Of course in your case the numbers will be different.\n\nAttributes\n----------\n\nThere is a single attribute, temperature, which provides the sensor temperature in degrees Celsius.\n\nLicensing\n---------\n\nThis project is distributed under the GNU GPLv3 license. You can read the full license text in LICENSE file in project's directory.\n"