This is historical information of device classes implemented in LKS331TempCtrl device server.
Use this link to find the valid information.
Development status:
Released,
Release: Release_1_0
Information status: New
Repository:
http://svn.code.sf.net/p/tango-ds/code/DeviceClasses/Temperature/LKS331TempCtrl
Contact:
Class Description
Class for controlling the Lake Shore Model 336 Temperature Controller
Families: Instrumentation
Key words:
Platform: All Platforms
Language: Cpp
Contact:
Hardware
Manufacturer: none
Bus: GPIB
Class interface
Attributes:
Name | Description |
---|---|
TemperatureAScalar: DevDouble | Current temperature for loop A in Kelvin |
TemperatureBScalar: DevDouble | Current temperature for loop B in Kelvin |
SetPointLoop1Scalar: DevDouble | Temperature Setpoint |
SetPointLoop2Scalar: DevDouble | Temperature Setpoint |
HeaterPowerScalar: DevLong | Shows heater output 0 : Off 1 : 0.5 W 2: 5.0 W 3. 50.0 W Controller command RANGE |
ControlInputScalar: DevString | CSET? |
HeaterOutputScalar: DevDouble | Loop 1 heater output in percent (%) |
Commands:
Name | Description |
---|---|
StateInput: DevVoid Output: State State Code |
This command gets the device state (stored in its <i>device_state</i> data member) and returns it to the caller. |
StatusInput: DevVoid Output: ConstDevString Status description |
This command gets the device status (stored in its <i>device_status</i> data member) and returns it to the caller. |
SetControlInputInput: DevString input, ``A`` or ``B`` Output: DevVoid |
Specifies which input to control from: A or B |
Pipes:
Properties:
Name | Description |
---|---|
ControlerDeviceDevString | Name of the controller device, can be a GpibDeviceServer SocketDevice Prologixadapter When using Prologixadapter, you will have to set the GpipID. |
GpibIDDevLong | Gpib device address when using a prologix adapter |
Updated:
The device class has been updated.
You are looking at this version now.
29 Feb 2020, DS Admin
Created:
The device class has been added to catalogue.