This is historical information of device classes implemented in PiLCTriggerGenerator device server.
Use this link to find the valid information.
Development status:
Released,
Release: Release_1_5
Information status: Updated
Repository:
http://svn.code.sf.net/p/tango-ds/code/DeviceClasses/OtherInstruments/PiLCTriggerGenerator
Contact:
Class Description
Trigger generator using the PiLC
Families: OtherInstruments
Key words:
Platform: Unix Like
Language: Cpp
License: GPL
Contact:
Hardware
Manufacturer: none
Bus: Not Applicable
Class interface
Attributes:
| Name | Description |
|---|---|
| PositionTriggerStartScalar: DevDouble | Position at which the triggers start after arming (used if triggermode 1, 3 or 6) |
| PositionTriggerStepSizeScalar: DevDouble | Step size for triggers in position (used if triggermode 1, 4 or 6). |
| NbTriggersScalar: DevLong | Number of trigger to generate |
| TriggerPulseLengthScalar: DevDouble | Length of the trigger pulse. Used in all trigger modes. It has to be smaller than the TimeTriggerStepSize (for trigger modes 2 and 3) and smaller than the time the motor needs for travelling the PositionTriggerStepSize for trigger modes (1 and 4). |
| ArmScalar: DevLong | Set to 1 for start triggering und to 0 to stop. |
| TriggerModeScalar: DevLong | Trigger Mode: start and step in: 1 -> position, 2 -> time, 3 -> position-time , 4 -> time-position, 5 -> external signal, 6-> zig-zag mode, triggers generated in postions between two limits, 7-> zig-zag mode, triggers generated in time intervals between two positions |
| TimeTriggerStartScalar: DevDouble | Time delay before start triggering after arming (only used if triggermode 2 or 4) |
| TimeTriggerStepSizeScalar: DevDouble | Step size for triggers in time (only used if triggermode 2 or 3). |
| Position1ConversionScalar: DevDouble | Conversion from enconder values to physical units: steps = conversion*units |
| CurrentPosition1Scalar: DevDouble | Encoder position transformed to physical units |
| FilePrefixScalar: DevString | File to save the data: FilePrefix.csv |
| FileDirScalar: DevString | Directory to save the data |
| TriggerCounterScalar: DevLong | — |
| EncoderTriggerScalar: DevLong | Encoder position where the current trigger is done. |
| RemainingTriggersScalar: DevLong | — |
| BufferLoadScalar: DevDouble | Percentage of SDRAM buffer currently read |
| Position2ConversionScalar: DevDouble | Conversion from enconder values to physical units: steps = conversion*units |
| Position3ConversionScalar: DevDouble | Conversion from enconder values to physical units: steps = conversion*units |
| Position4ConversionScalar: DevDouble | Conversion from enconder values to physical units: steps = conversion*units |
| Position5ConversionScalar: DevDouble | Conversion from enconder values to physical units: steps = conversion*units |
| PositionTriggerStopScalar: DevDouble | Position at which the triggers stop (only used if triggermode 6) |
| EncoderTriggeringScalar: DevLong | Encoder used for trigger settings in position |
| CurrentPosition2Scalar: DevDouble | Encoder position transformed to physical units |
| CurrentPosition3Scalar: DevDouble | Encoder position transformed to physical units |
| CurrentPosition4Scalar: DevDouble | Encoder position transformed to physical units |
| CurrentPosition5Scalar: DevDouble | Encoder position transformed to physical units |
| MaskDataToWriteScalar: DevDouble | Mask for the writing of data, set to 1 the bit corresponding to the data you don`t want to be writen: counter 1, encoder1 2, encoder2 3, encoder3 4, encoder4 5, encoder5 6. Ex. not write encoder1 -> 2, not write encoder1 and encoder4 -> 18 |
| Metadata1Scalar: DevString | String to write as attribute to the field Encoder1 in the nexus file |
| Metadata2Scalar: DevString | String to write as attribute to the field Encoder2 in the nexus file |
| Metadata3Scalar: DevString | String to write as attribute to the field Encoder3 in the nexus file |
| Metadata4Scalar: DevString | String to write as attribute to the field Encoder4 in the nexus file |
| Metadata5Scalar: DevString | String to write as attribute to the field Encoder5 in the nexus file |
| CounterDataSpectrum: DevDouble | — |
| Encoder1DataSpectrum: DevDouble | Positions where the triggers were done, in encoder units |
| Position1DataSpectrum: DevDouble | Positions where the triggers were done, in physical units. |
| Encoder2DataSpectrum: DevDouble | Positions where the triggers were done, in encoder units |
| Encoder3DataSpectrum: DevDouble | Positions where the triggers were done, in encoder units |
| Encoder4DataSpectrum: DevDouble | Positions where the triggers were done, in encoder units |
| Encoder5DataSpectrum: DevDouble | Positions where the triggers were done, in encoder units |
| Position2DataSpectrum: DevDouble | Positions from encoder2, in physical units. |
| Position3DataSpectrum: DevDouble | Positions from encoder2, in physical units. |
| Position4DataSpectrum: DevDouble | Positions from encoder2, in physical units. |
| Position5DataSpectrum: DevDouble | Positions from encoder2, in physical units. |
Commands:
| Name | Description |
|---|---|
| StateInput: DevVoid Output: State Device state |
This command gets the device state (stored in its device_state data member) and returns it to the caller. |
| StatusInput: DevVoid Output: ConstDevString Device status |
This command gets the device status (stored in its device_status data member) and returns it to the caller. |
| CalibrateEncoder1Input: DevDouble Position to load (in physical units) Output: DevVoid |
Set encoder position to the given value (in physical units). |
| CalibrateEncoder2Input: DevDouble Position to load (in physical units) Output: DevVoid |
Set encoder position to the given value (in physical units). |
| CalibrateEncoder3Input: DevDouble Position to load (in physical units) Output: DevVoid |
Set encoder position to the given value (in physical units). |
| CalibrateEncoder4Input: DevDouble Position to load (in physical units) Output: DevVoid |
Set encoder position to the given value (in physical units). |
| CalibrateEncoder5Input: DevDouble Position to load (in physical units) Output: DevVoid |
Set encoder position to the given value (in physical units). |
Pipes:
Properties:
| Name | Description |
|---|---|
| PiLCDeviceDevString | Name of the PiLC tango device to connect to |
12 Mar 2022, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
13 Jun 2020, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
10 Aug 2019, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
3 Aug 2019, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
6 Apr 2019, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
27 Oct 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
20 Oct 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
6 Oct 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
29 Sep 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
28 Apr 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
24 Mar 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
3 Feb 2018, DS Admin
Updated:
The device class has been updated.
You are looking at this version now.
19 Aug 2017, Piotr Goryl
Updated:
The device class has been updated.
You can see previous version here .
6 May 2017, Piotr Goryl
Updated:
The device class has been updated.
You can see previous version here .
23 Feb 2017, Piotr Goryl
Updated:
The device class has been updated.
You can see previous version here .
19 Jan 2017, Piotr Goryl
Updated:
The device server has been updated.
You can see previous version here .
2 Jan 2017, Piotr Goryl
Created:
The device server has been added to catalogue.
Updated:
The device class has been updated.
You can see previous version here .
13 Jun 2020, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
10 Aug 2019, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
3 Aug 2019, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
6 Apr 2019, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
27 Oct 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
20 Oct 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
6 Oct 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
29 Sep 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
28 Apr 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
24 Mar 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
3 Feb 2018, DS Admin
Updated:
The device class has been updated.
You are looking at this version now.
19 Aug 2017, Piotr Goryl
Updated:
The device class has been updated.
You can see previous version here .
6 May 2017, Piotr Goryl
Updated:
The device class has been updated.
You can see previous version here .
23 Feb 2017, Piotr Goryl
Updated:
The device class has been updated.
You can see previous version here .
19 Jan 2017, Piotr Goryl
Updated:
The device server has been updated.
You can see previous version here .
2 Jan 2017, Piotr Goryl
Created:
The device server has been added to catalogue.
Added by:pgoryl2
on:3 Feb 2018, 3:06 a.m.