This is historical information of device classes implemented in Lambda device server.
Use this link to find the valid information.
Development status:
Released,
Release: Release_1_5
Information status: Updated
Repository:
http://svn.code.sf.net/p/tango-ds/code/DeviceClasses/Acquisition/2D/Lambda
Contact:
Class Description
This is a tango server project for lambda detetor.
Families: Acquisition
Key words:
Platform: Unix Like
Language: Cpp
Contact:
Hardware
Manufacturer: DESY(FS-DS)
Bus: Ethernet
Class interface
Attributes:
| Name | Description |
|---|---|
| ShutterTimeScalar: DevDouble | shutter time |
| TriggerModeScalar: DevShort | TriggerMode of the Detector. 0: Internal trigger. 1: External trigger. Once dectector receives trigger, it takes predefined image numbers. 2. External trigger. Each trigger pulse takes one image. |
| DelayTimeScalar: DevDouble | delay time, currently it is not used |
| FrameNumbersScalar: DevLong | The frame numbers need to be acquired. |
| ThreadNoScalar: DevLong | — |
| EnergyThresholdScalar: DevFloat | set energy threshold. If the energy is above this threshold, the photon is counted. |
| OperatingModeScalar: DevString | operating mode of the detector: 24bit mode : TwentyFourBit 12bit mode : ContinuousReadWrite |
| ConfigFilePathScalar: DevString | Path of the configuration file. |
| SaveAllImagesScalar: DevBoolean | If this attribute is true, all data will be saved to disk |
| FilePrefixScalar: DevString | The prefix of the created file. The full name is FilePrefix_FileStartNum.FilePostfix. Note if file splitting is enabled, the file name is like (to be decided). |
| FileStartNumScalar: DevLong | The attribute is used when saving file. When file has been saved, the number is increased by one automatically. If user wants to overwrite the old file, the attribute value has to be reset. The full name is FilePrefix_FileStartNum.FilePostfix. |
| FilePreExtScalar: DevString | file pre extention. If it is not empty, the final file name will be FilePrefix_FileStartNumFilePreExt.FilePostfix. |
| FilePostfixScalar: DevString | Now the Lambda only writes file into hdf5 format, the postfix is h5. The full name is FilePrefix_FileStartNum.FilePostfix. |
| SaveFilePathScalar: DevString | Save File Path. Define path for saving files. |
| SaveFileNameScalar: DevString | define the file name for saving file. |
| LatestImageNumberScalar: DevLong | The frame number of latest image |
| LiveModeScalar: DevBoolean | live mode of the detector. Mainly used for online visualization. True: enable online visulization, frame rate is limited to 10fps. The data will not be saved to disk. The data can be fetched by accessing attribute Image False: diasble online visualization. |
| TotalLossFramesScalar: DevLong | the total frame numbers lost during transmitting, used in 10GE linke mode. |
| CompressorShuffleScalar: DevBoolean | during compression, shuffle the data or not |
| CompressionRateScalar: DevUShort | set compression rate from 0-9 |
| CompressionEnabledScalar: DevBoolean | applying compression to data when saving. True: compression False: no compression |
| LayoutScalar: DevString | The layout out of Chips. 1 : 1536x512 pixels 2 : 768x512 pixels |
| ShutterTimeMaxScalar: DevDouble | define the maximum shutter time(only for expert view). |
| ShutterTimeMinScalar: DevDouble | define the minimum shutter time(only for expert view). |
| WidthScalar: DevULong | Image width |
| HeightScalar: DevULong | Image height |
| DepthScalar: DevULong | Pixel depth. |
| LiveFrameNoScalar: DevLong | Current frame No. which is related to the Image attribute |
| DistortionCorrectionScalar: DevUShort | distortion correction 1 : division; Large pixels are divided according to predefined denominator. The value of the pixel are rounded during division. If pixel value is saturated, the division is not applied. |
| PrecompressEnabledScalar: DevBoolean | enable precomression |
| FramesPerFileScalar: DevLong | If this number is not equal with FrameNumbers, the file is splitted. each splitted file only contains frames which is set by this attribute. |
| CreateDirScalar: DevBoolean | If this is enabled, non-existing path will be created automatically. |
| CheckFileExistsScalar: DevBoolean | If this is enabled, the input file name will be checked. If file already exists, exception will be thrown. |
| FreeBufferScalar: DevULong | This attribute tells the free buffer for the raw images in RAM. unit:number of images |
| FileNamePathCaseSensitiveScalar: DevBoolean | If this is true, the file name and save file path are case sensitive. Otherwise, the filename and path are always converted to lower case. |
| AppendDataScalar: DevBoolean | append data to old file. This is useful when it only takes one image at each scan point during scan. |
| LiveLastImageDataImage: DevLong | provide last image data for the live mode |
Commands:
| Name | Description |
|---|---|
| StateInput: DevVoid Output: State Device state |
This command gets the device state (stored in its device_state data member) and returns it to the caller. |
| StatusInput: DevVoid Output: ConstDevString Device status |
This command gets the device status (stored in its device_status data member) and returns it to the caller. |
| StartAcqInput: DevVoid Output: DevVoid |
Start the acquisition. |
| StopAcqInput: DevVoid Output: DevVoid |
stop the acquistion |
| StopAndSaveInput: DevVoid Output: DevVoid |
After stop acquisition is called, the images in the buffer are also saved. |
Pipes:
Properties:
| Name | Description |
|---|---|
| SimulationModeDevUShort | Providing simulation mode for the detector |
| ConfigurationPathDevString | path of configuration file |
21 Mar 2020, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
23 Nov 2019, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
20 Jul 2019, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
22 May 2019, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
2 Mar 2019, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
8 Dec 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
27 Oct 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
15 Sep 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
4 Aug 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
28 Apr 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
10 Mar 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
5 Jan 2018, DS Admin
Updated:
The device class has been updated.
You are looking at this version now.
30 Sep 2017, Piotr Goryl
Updated:
The device class has been updated.
You can see previous version here .
23 Feb 2017, Piotr Goryl
Updated:
The device class has been updated.
You can see previous version here .
19 Jan 2017, Piotr Goryl
Updated:
The device server has been updated.
You can see previous version here .
2 Jan 2017, Piotr Goryl
Created:
The device server has been added to catalogue.
Updated:
The device class has been updated.
You can see previous version here .
23 Nov 2019, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
20 Jul 2019, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
22 May 2019, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
2 Mar 2019, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
8 Dec 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
27 Oct 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
15 Sep 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
4 Aug 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
28 Apr 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
10 Mar 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
5 Jan 2018, DS Admin
Updated:
The device class has been updated.
You are looking at this version now.
30 Sep 2017, Piotr Goryl
Updated:
The device class has been updated.
You can see previous version here .
23 Feb 2017, Piotr Goryl
Updated:
The device class has been updated.
You can see previous version here .
19 Jan 2017, Piotr Goryl
Updated:
The device server has been updated.
You can see previous version here .
2 Jan 2017, Piotr Goryl
Created:
The device server has been added to catalogue.
Added by:pgoryl2
on:5 Jan 2018, 3:15 p.m.