This is historical information of device classes implemented in VarianDualCtrl device server.

Use this link to find the valid information.

Development status: Released
Information status: Updated
Repository: http://svn.code.sf.net/p/tango-ds/code/DeviceClasses/Vacuum/VarianDualCtrl
Contact:


Class Description

This device server is intended to drive a Varian Dual ion pump controller.

Families: Vacuum

Key words:

Platform: Unix Like

Language: Cpp

License:

Contact:

Hardware

Manufacturer: Varian

Bus: Serial Line

Class interface

Attributes:

Name Description

Commands:

Name Description
OffInput: DevShort
The channel number.
Output: DevVoid		 Set to OFF the considered channel.
ReadIprotectInput: DevShort
The channel number
Output: DevLong		 Read the iprotect of the considered channel.
ReadIstep1Input: DevShort
The channel number
Output: DevFloat		 Read the istep1 of the considered channel.
StateInput: DevVoid
Output: State
State Code		 This command gets the device state (stored in its <i>device_state</i> data member) and returns it to the caller.
StatusInput: DevVoid
Output: ConstDevString
Status description		 This command gets the device status (stored in its <i>device_status</i> data member) and returns it to the caller.
AddPumpInput: DevShort
Channel number
Output: DevVoid		 Add a pump to be controlled.\nThe controller thread will initialize the specified pump and then control it.
ChangeSetpointInput: DevVarFloatArray
argin[0] = channel number coded as a float.\nargin[1] = setpoint value.\nargin[2] = 1 for first step current - 2 for second step current.
Output: DevVoid		 Change the setpoint of specified channel, and specified current
GetChannelStateInput: DevShort
The channel number
Output: State		 Get the considered channel state ("ON" or "OFF").
GetChannelStatusInput: DevShort
The channel number
Output: DevString		 Get the status of the considered channel.
GetControlTypeInput: DevVoid
Output: DevString
The controller control type		 Read the type of control of the controller ("remote" or "local").
GetSizeInput: DevShort
The channel number.
Output: DevString
The pump size		 Return the pump size.
GetVersionInput: DevVoid
Output: DevString
The firmware version string.		 Get the controller firmware version.
IsInitializedInput: DevShort
Channel number.
Output: DevBoolean		 return true if specified pump is nitialized.
LocalInput: DevVoid
Output: DevVoid		 Set the controller to local mode (operated from front panel).
OnInput: DevShort
The channel number.
Output: DevVoid		 Set to ON the considered channel.
ReadCurrentInput: DevShort
The channel number
Output: DevFloat
The current value		 Get the measure current value of the considered channel.
ReadFixedModeInput: DevShort
Channel number
Output: DevBoolean		 Returns TRUE if the pump is in FIXED mode, FALSE if the mode is STEP.
ReadImaxInput: DevShort
The channel number
Output: DevLong		 Read the imax of the considered channel.
ReadIstep2Input: DevShort
The channel number
Output: DevFloat		 Read the istep2 of the considered channel.
ReadPressureInput: DevShort
The channel number.
Output: DevFloat		 Read the pressure of the considered channel.
ReadStartModeInput: DevShort
Channel number
Output: DevBoolean		 Returns TRUE if the pump is in START mode, FALSE if the mode is PROTECT
ReadStateInput: DevShort
The channel number
Output: State
The state of the channel		 Get the state of the considered channel.
ReadVmaxInput: DevShort
The channel number
Output: DevLong		 Read the Vmax of the considered channel.
ReadVoltageInput: DevShort
The channel number
Output: DevFloat
The voltage value		 Get the measure voltage value of the considered pump.
ReadVstep1Input: DevShort
The channel number
Output: DevLong		 Read the vstep1 of the considered channel.
ReadVstep2Input: DevShort
The channel number
Output: DevLong		 Read the vstep2 of the considered channel.
RemoteInput: DevVoid
Output: DevVoid		 Set the controller to the remote mode (operated using the serial line).
SetFixedModeInput: DevShort
The channel number
Output: DevVoid		 Set the considered channel to the fixed mode.
SetMaxVoltageInput: DevVarShortArray
The channel number.
Output: DevVoid		 Set the max voltage for the considered channel. - argin[0] = channel number - argin[1] = max voltage value
SetProtectModeInput: DevShort
The channel number
Output: DevVoid		 Set the considered channel to the protect mode.
SetStartModeInput: DevShort
The channel number
Output: DevVoid		 Set the considered channel to the start mode.
SetStepModeInput: DevShort
The channel number
Output: DevVoid		 Set the considered channel to the step mode.
GetControllerInput: DevVoid
Output: DevString
type of contoller		 get the type on Controller

Pipes:

Name Description

Properties:

Name Description
SerialDeviceNameDevString The name of the associated serial line device.

23 Feb 2017, Piotr Goryl
Updated:
The device class has been updated.
You are looking at this version now.


19 Jan 2017, Piotr Goryl
Updated:
The device server has been updated.
You can see previous version here .


3 Jan 2017, Piotr Goryl
Created:
The device server has been added to catalogue.
Added by:pgoryl2 on:23 Feb 2017, 11:50 a.m.