This is historical information of device classes implemented in SmarActMCSMotor device server.
Use this link to find the valid information.
Development status:
Released
Information status: Updated
Repository:
http://svn.code.sf.net/p/tango-ds/code/DeviceClasses/Motion/MotorControllers/Smaract/SmarActMCSMotor
Contact:
Class Description
Motor class for smaract mcs controller
Families: Motion
Key words:
Platform: Unix Like
Language: Cpp
License: GPL
Contact:
Hardware
Manufacturer: Smaract
Product:
Bus: Not Applicable
Class interface
Attributes:
| Name | Description |
|---|---|
| PositionScalar: DevDouble | — |
| ConversionScalar: DevDouble | — |
| UnitLimitMinScalar: DevDouble | — |
| UnitLimitMaxScalar: DevDouble | — |
| HoldTimeScalar: DevULong | time in ms the position is actively held after reaching the target (60000 = infinite) |
| HomeDirectionScalar: DevBoolean | Direction to use when running reference mark search false = forward true = backward |
| AutoZeroScalar: DevBoolean | Decides whether the axis position will be set to zero after a reference mark search (= Home) true = position will be set to zero false = position will not be set to zero |
| SpeedScalar: DevULong | he closed loop move speed, cannot exceed the maximum closed loop frequency (MaxFrequency). A value of 0 disables speed control. Unit is μm/s^2 for linear positioners and in m°/s^2 for rotary positioners. |
| AxisTypeScalar: DevULong | The axis type, 0: linear movement 1: angular movement 2: goniometer |
| PositionKnownScalar: DevBoolean | true: the controller knows the physical position of this axis false: he controller does not know the physical position of this axis if false, run command `Home` |
| MaxFrequencyScalar: DevLong | The maximum closed loop frequency in hz (50 - 18500). If you experience sudden stops on one axis when starting a movement on another try setting this to a lower value. The value can not be read from the controller, so this is a memorized attribute and will always be set on server startup. |
| AccelerationScalar: DevULong | Acceleration, 0 disables the acceleration control. Unit is μm/s 2 for linear positioners and m°/s 2 for rotary positioners. |
| SensorTypeScalar: DevDouble | Sensor type number, check with hardware doc |
Commands:
| Name | Description |
|---|---|
| StateInput: DevVoid Output: State Device state |
This command gets the device state (stored in its device_state data member) and returns it to the caller. |
| StatusInput: DevVoid Output: ConstDevString Device status |
This command gets the device status (stored in its device_status data member) and returns it to the caller. |
| CalibrateInput: DevDouble Calibrate axis to argin Output: DevVoid |
— |
| StopMoveInput: DevVoid axis number Output: DevVoid |
— |
| HomeInput: DevVoid Output: DevVoid |
— |
| SensorCalibrateInput: DevULong Axis number Output: DevVoid |
— |
Pipes:
Properties:
| Name | Description |
|---|---|
| SmarActMCSCtrlDeviceDevString | Name of SmarActMCSCtrl device |
| AxisNumberDevULong | axis index number (0-2) |
Updated:
The device class has been updated.
You can see previous version here .
22 Feb 2018, DS Admin
Updated:
The device class has been updated.
You can see previous version here .
13 May 2017, Piotr Goryl
Updated:
The device class has been updated.
You can see previous version here .
29 Apr 2017, Piotr Goryl
Updated:
The device class has been updated.
You can see previous version here .
23 Feb 2017, Piotr Goryl
Updated:
The device class has been updated.
You are looking at this version now.
19 Jan 2017, Piotr Goryl
Updated:
The device server has been updated.
You can see previous version here .
2 Jan 2017, Piotr Goryl
Created:
The device server has been added to catalogue.