ports opened to access devices

# yesterday at 18h12
philippeg	Hello, while testing devices on virtual machines, I noticed some ports needed to allow tango to run. Those ports does not seem to be documented for now, I think this could help so I put this here to confirm (I think it then it should be entered in documentation, place to be defined). 1. since TANGO_HOST is associated to an IP and a TCP port (often 10000 or 20000), communication to this server should of course be allowed on TCP port. 2. communication on 20001 TCP port is mandatory for a server running tango-starter service. 3. I remember that those ports are choosen randomly on a given range by default. Since I see on jive the port associated to a device, which is often greater than 20001, I understand TCP communications on port greater than 20002 (from 20002 to 65535?) should be allowed if at least a device runs on the server. Do you confirm those informations? Are there some other port ranges to know, especially for IT teams? Regards - Philippe Edited yesterday at 18h18

# yesterday at 18h12

Hello,
while testing devices on virtual machines, I noticed some ports needed to allow tango to run.
Those ports does not seem to be documented for now, I think this could help so I put this here to confirm (I think it then it should be entered in documentation, place to be defined).

1. since TANGO_HOST is associated to an IP and a TCP port (often 10000 or 20000), communication to this server should of course be allowed on TCP port.

2. communication on 20001 TCP port is mandatory for a server running tango-starter service.

3. I remember that those ports are choosen randomly on a given range by default. Since I see on jive the port associated to a device, which is often greater than 20001, I understand TCP communications on port greater than 20002 (from 20002 to 65535?) should be allowed if at least a device runs on the server.

Do you confirm those informations?
Are there some other port ranges to know, especially for IT teams?

Regards

- Philippe

Edited yesterday at 18h18

# 6 hours ago
Reynald	Salut Philippe, The Starter device is a Tango device like any other Tango device with respect to the choice of ports by omniORB. So the affirmation "2. communication on 20001 TCP port is mandatory for a server running tango-starter service." is wrong. In our control system, we have Starter devices running on different ports (some of them on ports below 10000). By default (if not specified with ORBendPoint omniORB option), the OS will choose the port number and I guess the port numbers range might change from one OS to another. If you are using events, ZMQ (the OS) will also choose by default some random port numbers for the events. Kind regards, Reynald Rosenberg's Law: Software is easy to make, except when you want it to do something new. Corollary: The only software that's worth making is software that does something new.

# 6 hours ago

Reynald

Salut Philippe,

The Starter device is a Tango device like any other Tango device with respect to the choice of ports by omniORB.
So the affirmation "2. communication on 20001 TCP port is mandatory for a server running tango-starter service." is wrong.
In our control system, we have Starter devices running on different ports (some of them on ports below 10000).

By default (if not specified with ORBendPoint omniORB option), the OS will choose the port number and I guess the port numbers range might change from one OS to another.

If you are using events, ZMQ (the OS) will also choose by default some random port numbers for the events.

Kind regards,
Reynald

Rosenberg's Law: Software is easy to make, except when you want it to do something new.
Corollary: The only software that's worth making is software that does something new.

# 3 hours ago
philippeg	Reynald Salut Philippe, The Starter device is a Tango device like any other Tango device with respect to the choice of ports by omniORB. So the affirmation "2. communication on 20001 TCP port is mandatory for a server running tango-starter service." is wrong. In our control system, we have Starter devices running on different ports (some of them on ports below 10000). Hi Reynald, oh, of course thanks for your attention. I wrote that the port of TANGO_HOST can be choosen, but I did not kept that in mind while writing the other points! Indeed, the devices ports (including starter) are random, and as you said below, one can define a port number if needed. Reynald By default (if not specified with ORBendPoint omniORB option), the OS will choose the port number and I guess the port numbers range might change from one OS to another. I put there the link to the doc for readers: https://tango-controls.readthedocs.io/en/latest/development/device-api/device-server-writing.html#running-a-c-device-server Reynald If you are using events, ZMQ (the OS) will also choose by default some random port numbers for the events. By the way, is there a way to choose the port number as for CORBA? - Philippe

# 3 hours ago

philippeg

Reynald
Salut Philippe,
The Starter device is a Tango device like any other Tango device with respect to the choice of ports by omniORB.
So the affirmation "2. communication on 20001 TCP port is mandatory for a server running tango-starter service." is wrong.
In our control system, we have Starter devices running on different ports (some of them on ports below 10000).

Hi Reynald,
oh, of course thanks for your attention.
I wrote that the port of TANGO_HOST can be choosen, but I did not kept that in mind while writing the other points!

Indeed, the devices ports (including starter) are random, and as you said below, one can define a port number if needed.

Reynald
By default (if not specified with ORBendPoint omniORB option), the OS will choose the port number and I guess the port numbers range might change from one OS to another.

I put there the link to the doc for readers: https://tango-controls.readthedocs.io/en/latest/development/device-api/device-server-writing.html#running-a-c-device-server

Reynald
If you are using events, ZMQ (the OS) will also choose by default some random port numbers for the events.

By the way, is there a way to choose the port number as for CORBA?

- Philippe